Tipo de dispositivo | Solid state drive - hot-swap |
Capacidad | 240 GB |
Tipo de meoria flash NAND | Célula de triple nivel (TLC) |
Factor de forma | 2.5" SFF |
Interfaz | SATA 6Gb/s |
CaracterÃsticas | Digitally Signed Firmware |
Altura | 7 mm |
Peso | 500 g |
Incluye | HPE Basic Carrier |
Escrituras en unidad por dÃa (DWPD) | 0.8 |
SSD de resistencia | 250 TB |
Velocidad de transferencia de la unidad | 600 MBps (externo) |
Tasa de datos internos | 520 MBps (lectura)/ 255 MBps (escritura) |
Lectura aleatoria 4KB | 57000 IOPS |
Escritura aleatoria 4KB | 14000 IOPS |
Interfaces | 1 x SATA 6 Gb/s - ATA serie de 7 patillas |
BahÃa compatible | 2.5" SFF |
Consumo de energÃa | 1.23 vatios (en espera) ¦ 2.48 vatios (lectura aleatoria) ¦ 2.48 vatios (escritura aleatoria) ¦ 2.21 vatios (lectura secuencial) ¦ 2.44 vatios (escritura secuencial) ¦ 2.48 vatios (lectura/escritura aleatoria) ¦ 2.48 vatios (máximo) |
Servicio y mantenimiento | GarantÃa limitada - 3 años |
Diseñado para | HPE ProLiant DL20 Gen10 Plus (2.5"), DL20 Gen10 Plus Base (2.5"), DL20 Gen10 Plus Entry (2.5"), DL20 Gen10 Plus High Performance (2.5"), DL20 Gen10 Plus Performance (2.5"), DL325 Gen10 Plus V2 (2.5"), DL325 Gen10 Plus V2 Base (2.5"), DL325 Gen10 Plus V2 for Weka Base Tracking (2.5"), DL325 Gen10 Plus V2 Performance (2.5"), DL345 Gen10 Plus (2.5"), DL345 Gen10 Plus Base (2.5"), DL345 Gen10 Plus Entry (2.5"), DL360 Gen10 Plus (2.5"), DL360 Gen10 Plus All-NVMe Server for Software Defined Storage (2.5"), DL360 Gen10 Plus for Weka Base Tracking (2.5"), DL360 Gen10 Plus Network Choice (2.5"), DL365 Gen10 Plus (2.5"), DL385 Gen10 Plus V2 (2.5"), DL385 Gen10 Plus V2 Base (2.5"), DL385 Gen10 Plus V2 Entry (2.5"), ML30 Gen10 Plus (2.5"), ML30 Gen10 Plus Entry (2.5"), ML30 Gen10 Plus Performance (2.5") ¦ HPE SimpliVity 325 Gen10 Plus V2 Node (2.5") |